Huawei SmartGuard-63A-T0 Three Phase

Technical Specification

General Data
Dimensions (W x H x D) - 490 mm × 600 mm × 170 mm
Weight - 17 kg

Performance
AC voltage (nominal) - 380 / 400 / 415 V, 220 / 230 / 240 V, L1 / L2 / L3 / N + PE
Max. current (from grid) - 63 A
Max. current (from inverter) - 60 A
Max. current (to backed-up load) - 63 A
Max. current (to non-backed-up load) - 63 A
Low-voltage ride-through - Supported
Switchover time - ≤ 20 ms (in Seamless Mode)
Bypass operation mode - Manual
DG mode - Remote control

Interface
Power output - 9.5 - 13.2 V @ 100 mA, ≤ 3 m
LAN - 10 / 100 Mbps, ≤ 100 m
WAN - 10 / 100 Mbps, ≤ 100 m
WLAN - AP Mode, 802.11b/g/n (2.412 GHz - 2.484 GHz)
RS485 - 9600 / 19,200 / 115,200 bps,× 2, ≤ 50 m
Digital input - ×2, ≤ 20 m Avtive port
Digital output - ×2, ≤ 20 m
DG Do Port - Passive Port, 1 - 100 mA ≤ 24 V
ATS - Need to prepare the ATS, which supports automatic control and automatic switch-in and reset.

Measurement Range
Current range - ≤ 63 A
Energy accuracy - ± 1%

Device Management
Smart energy controllers model - up to 3
Smart chargers - up to 2
Heat pump - up to 1
Shelly device - up to 20

Environment
Cooling - Natural Convection
Relative humidity range - 5% - 95% RH (non condensing)
Max. operating altitude - 4000 m (derated over 2000 m)
IP rating - IP55
Operating temperature range - 25 °C - 50 °C

Compatible Device
Smart energy controller - SMax. 3 inverters supported in parallel connection (MAP0)
Max. 1 inverter supported (M1 / MB0)
Smart charger - SCharger–7KS / 22KT–S0
Heat pump - SG-ready
Shelly device - Shelly Plus Plug S, Shelly Plus 2PM, Shelly Pro 2PM